1. Mark the centre of the bay and fix the centre joining bracket at the height required, fix ceiling brackets so that the
back of the pole will be 7cm from the window or wall.

2. Offer up one of the poles into the centre joining bracket, with the pre drilled holes underneath. hold the pole level, Insert the 1st bracket from underneath into the pre drilled hole near the end of the pole. mark the window or wall for
the fixing holes, remove the pole and drill the wall if required, and fix the bracket. slight adjustment of one or two
degrees can be made to the bends with gentle pressure if necessary.

3. Re fit the pole into the centre joining bracket and slot the other end onto the 1st wall bracket, tighten the grub
screw in the centre joining bracket with allen key provided.

4. Insert the 2nd bracket into the pre-drilled hole in the under side of the pole, near the bend.
Check that the pole is level, mark the window or wall for the fixing holes, drill the wall if required and fix bracket.

5. Now repeat steps 1 - 4 above for the second pole.

6. Slide one closed curtain ring and finial onto the ends of the poles and tighten the grub screws

7. Hook an even number of open rings onto each pole.

8. Congratulations, you can now hang your curtains.